
Sewer Line Questions, Answered
Every question answered on this site, in one place — what to do first, how a replacement works, what a camera shows, and how to spot a failing line.
All questions
A camera inspection decides it. If the pipe is intact and the problem is a blockage, cleaning usually handles it. If the camera shows a collapse, a bad belly, separated joints, or heavy root intrusion through many joints, cleaning only buys time — replacement is the work that fixes the pipe itself.
Open-trench replacement digs a trench along the full line, removes the old pipe, and lays new pipe. Trenchless replacement — pipe bursting or lining — works through small access pits and leaves the surface largely intact. Trenchless fits many Parma laterals, but a badly collapsed line or a line with no straight path may still need a trench.
Most residential replacements are measured in days, not weeks. A short, shallow line with clear access can be done quickly; a long or deep line, a line under a driveway, or a job that needs work in the street takes longer. The camera inspection and the locate give the crew the information needed to plan the schedule.
It depends on the method. Open-trench work digs along the line, so the lawn over the line is disturbed and then backfilled and graded. Trenchless work digs only small pits at each end, so most of the lawn stays as it is. The crew explains which method fits your line before work starts.
Most residential replacements today use PVC or a similar modern plastic pipe, with sealed joints and a smooth interior that roots cannot easily enter. The exact material and diameter are chosen for the home, the length of the run, and the connection at the street main.
Work that connects to the street main and work in the public right-of-way follows the city's rules, and permits are part of that process. The crew handling the job deals with the permit side before digging starts.
In most Ohio cities, the homeowner is responsible for the lateral from the house to the street main, including the connection at the main. The city maintains the main itself. That is why lateral problems are handled by calling a local professional, not the city.
Yes, with planning. Frozen ground makes digging slower and the work takes longer, but replacements do happen in Ohio winters. A backup that is happening now is handled as an urgent job regardless of the season.
No. The line has to be passable — a bursting head or a liner has to get through it. A line that has collapsed flat, or one with a sharp sideways offset, may not allow it. The camera inspection is what decides, and a line that cannot be done trenchless may still need a trench for part or all of the run.
They solve different problems. Bursting replaces the pipe entirely and can go the same size or larger, so it fits a line that is badly damaged or undersized. Lining renews the inside of a pipe that is still structurally sound, and it leaves a smooth, jointless pipe. The camera findings decide which one fits your line.
Yes, slightly — the liner sits inside the old pipe, so the inside diameter is a little smaller. In practice the smooth interior of the liner often flows as well as the rough, scaled interior of the old pipe. The crew checks the diameter and the fall before recommending lining.
Most residential trenchless jobs are measured in days. The camera inspection and the locate come first, then the pits are dug and the bursting or lining work follows. A long or deep line, or a line under a driveway, takes longer than a short, shallow one.
That is the point of the method — the work happens between two small pits, so the surface above the line is not opened. If the line runs under a driveway, the pits are placed on either side of it. The pits themselves are backfilled and graded when the work is done.
A burst-in new pipe is a new pipe — the same material used in open-trench replacement. A cured liner is a new pipe inside the old one, with no joints for roots to enter. Either way, the finished line is checked on camera before the job is called done.
It depends on the belly. A mild belly can sometimes be lined, but a deep belly is a low spot in the line, and a liner follows the shape of the old pipe — it does not correct the fall. A bad belly usually needs a trench to re-grade that section.
Work that connects to the street main and work in the public right-of-way follows the city's rules, and permits are part of that process. The crew handling the job deals with the permit side before work starts.
Most residential inspections take well under an hour of work on site, once the camera is in the line. A long line, a line that needs clearing first, or a line with no easy access point takes longer. The crew explains the timing when the appointment is made.
No. The camera is a smooth head on a flexible cable, pushed gently through the line. It is made for this work, and it is the standard tool for inspecting sewer lines. If the camera cannot pass a section, that itself is a finding — it means the line is blocked or collapsed there.
A cleanout makes the job easier, but it is not always required. The camera can also enter through a pulled toilet. If there is no access at all, a cleanout can be installed — which also makes any future work on the line easier.
A camera can show water entering the pipe through a crack or a separated joint, and it can show a belly where water stands. It cannot see water leaking out of the pipe into the soil. A wet patch in the yard above the line, together with camera findings, points to where the line is failing.
It is one of the most useful inspections a buyer can order in this city. Many Parma homes still have their original clay tile laterals from the 1950s and 1960s, and a lateral at the end of its life may show no symptom at all until it backs up. The inspection shows the condition of the line before the purchase is final.
The crew explains what the camera found, where the collapse is, and how deep — and what the options are. A collapse cannot be cleaned or lined; the collapsed section has to be dug and replaced, or the whole line replaced by bursting. The locator marking shows exactly where to dig.
The footage and the findings are the record of the inspection. Ask for the recording and the written findings when the inspection is done — they are useful for any later work on the line, and for a buyer or an insurer who asks about the line's condition.
Yes. The camera works in cold weather, and the line itself is below the frost line. Snow on the ground makes locating and marking slower, but the inspection itself is not a warm-weather-only job.
The lateral is the pipe that connects one home to the street sewer main. The main is the larger pipe in the street that collects the laterals from many homes and carries the flow onward. The homeowner is responsible for the lateral; the city maintains the main.
A camera inspection shows it. If the camera reaches the street main and the main is clear, the problem is in the lateral. If the camera cannot get through, or the main itself is the problem, the crew explains what the camera showed and what happens next — which may involve the city.
The lateral runs to the street main, and the connection at the main is part of the job. Work in the street and the right-of-way follows the city's rules, and the permits for that work are handled before digging starts.
Often, yes. Trenchless methods — pipe bursting or lining — replace the lateral through small pits, so a driveway or walkway above the line is not opened. Whether trenchless fits depends on the camera findings, and the crew explains the options before work starts.
Most residential lateral replacements are measured in days. The length of the run, the depth, and whether the line goes under a driveway all affect the schedule. The camera inspection and the locate give the crew the information needed to plan it.
Most residential laterals today are replaced with PVC or a similar modern plastic pipe, with sealed joints and a smooth interior. Trenchless bursting often uses HDPE. The material and diameter are chosen for the home and the connection at the main.
Work that connects to the street main and work in the public right-of-way follows the city's rules, and permits are part of that process. The crew handling the job deals with the permit side before digging starts.
Yes, with planning. Frozen ground makes digging slower, but lateral replacements do happen in Ohio winters. A lateral that is backing up now is handled as an urgent job regardless of the season.
A camera inspection shows it. Clay tile is easy to recognise on camera — short sections with a joint every two or three feet. The age of the home is also a strong clue: a Parma home built in the 1950s or 1960s almost always has a clay tile lateral unless it has already been replaced.
It depends on the condition. A single cracked section with good pipe on either side can be spot-repaired. A line with one or two open joints can sometimes be lined. But a clay line with roots at many joints, separated sections, or a bad belly is a replacement — the whole line is the same age and the same material, and the next joint will fail soon after the last one is fixed.
Yes — clay is one of the materials bursting handles well, because it is brittle and breaks outward cleanly as the bursting head passes. The new pipe is pulled into the same path. The camera inspection first confirms the line is passable and not collapsed flat.
The replacement pipe is a modern plastic pipe with sealed joints and a smooth interior — a different kind of pipe from clay tile. It has far fewer joints for roots to enter, and the joints it does have are sealed. The finished line is checked on camera before the job is called done.
Most residential clay lateral replacements are measured in days. The length of the run, the depth, and whether the line goes under a driveway all affect the schedule. The camera inspection and the locate give the crew the information needed to plan it.
Work that connects to the street main and work in the public right-of-way follows the city's rules, and permits are part of that process. The crew handling the job deals with the permit side before digging starts.
Yes, with planning. Frozen ground makes digging slower, but clay lateral replacements do happen in Ohio winters. A line that is backing up now is handled as an urgent job regardless of the season.
With open-trench replacement, the old clay sections are removed as the trench is dug. With pipe bursting, the old clay is broken outward into the surrounding soil and stays underground, with the new pipe pulled into its place. Either way, the old pipe no longer carries wastewater.
Stop using water — no taps, no flushing, no washing machine or dishwasher. Keep people and pets away from the water. Then call for help and describe where the water is coming in and whether it is still rising.
Sewage water is treated as contaminated water. Keep away from it, do not walk through it, and do not try to clean it with household tools. The crew explains what to do about the water that came in, and what to document.
A backup in progress is handled as an urgent call, and the line is staffed on the hours shown on the contact page. The urgent work — stopping the backup and restoring flow — is the priority, and the lasting fix is planned from the camera findings.
It depends on the cause. If the blockage was a one-off mass of waste, clearing it may be enough. If the camera shows a collapse, a bad belly, or roots through many joints, clearing restores flow but the pipe is still failing — and the lasting fix is a repair or a replacement.
A camera inspection shows it. If the lateral is clear to the main and the main is the problem, the crew explains what the camera showed. A problem in the street main is the city's responsibility, and the findings are the evidence for that conversation.
No. Chemical drain cleaners do not clear a main-line blockage, and they can make the work harder and less safe for the crew. Stop using water, keep away from the backup, and wait for help.
The camera inspection after the emergency is the step that answers that. It shows whether the line needs a spot repair, lining, bursting, or full replacement — and the lasting fix is the work that keeps the backup from returning.
It depends on the policy. Many standard homeowners policies do not cover sewer backups unless a specific endorsement was added. Check your policy, take photos of the water and the damage, and keep the camera findings and any invoices for the claim.
Stop using water — no taps, no flushing, no washing machine or dishwasher. Keep people and pets away from the water. Then call for help and describe where the water is coming in and whether it is still rising.
The usual causes are a blockage in the lateral, a collapsed or bellied section of pipe, roots at many joints, or a surcharged street main or shared sewer pushing water back in heavy rain. A camera inspection after the backup is cleared shows which one it is.
Clearing restores flow, but it only lasts if the cause was a one-off blockage. If the camera shows a collapse, a bad belly, or roots through many joints, the line will back up again — and the lasting fix is a repair or a replacement of the failed pipe.
A backwater valve is a one-way valve in the lateral that lets wastewater flow out but closes when water tries to flow back in from the street. It helps where backups come from the street side in heavy rain. Whether one fits your home depends on the layout of the lateral and where the lowest drain sits — the crew explains the options after the camera inspection.
It depends on the policy. Many standard homeowners policies do not cover sewer backups unless a specific endorsement was added. Check your policy, take photos of the water and the damage, and keep the camera findings and any invoices for the claim.
The camera inspection is the step that answers that. It shows whether the line needs a spot repair, lining, bursting, or full replacement — and the lasting fix is the work that keeps the backup from returning. A backwater valve is an additional option where the problem comes from the street side.
Yes. A lateral can be partly blocked or bellied and still drain normally under light use. The backup appears when the flow rises — a load of laundry, several showers, or heavy rain — and the line cannot carry it. The camera shows the condition of the line before the next backup.
No. Chemical drain cleaners do not clear a main-line blockage, and they can make the work harder and less safe for the crew. Stop using water, keep away from the backup, and call for help.
A camera inspection shows it. Cast iron is easy to recognise on camera — a rough, dark interior with scale, and long sections with joints far apart. The age of the home is also a strong clue: a Parma home built in the 1950s or 1960s almost always has cast iron for the indoor drains and the first part of the lateral.
Cleaning can clear a blockage, and descaling can remove some of the scale — but it cannot restore the wall thickness that corrosion has taken, and it cannot fix a joint that has loosened or a section that has cracked. A cast iron line that has narrowed badly will close again, and the lasting fix is replacement or lining.
Yes. Cast iron is brittle enough to break outward as the bursting head passes, and the new pipe is pulled into the same path. The camera inspection first confirms the line is passable and the corrosion has not collapsed a section flat.
Where the cast iron is still round and continuous, a resin liner can be installed inside it. The liner gives the line a smooth, jointless interior that the corroded iron no longer has. A collapsed or badly offset section cannot be lined, and needs a trench or bursting instead.
Most residential cast iron replacements are measured in days. The length of the run, the depth, and whether the line goes under a driveway all affect the schedule. The camera inspection and the locate give the crew the information needed to plan it.
Work that connects to the street main and work in the public right-of-way follows the city's rules, and permits are part of that process. The crew handling the job deals with the permit side before digging starts.
The work is mostly outside, in the yard and at the street. The indoor part is the connection at the foundation, where the new line meets the indoor drain system. The crew explains what happens inside the house before work starts, and the finished line is checked on camera.
Most residential replacements use PVC or a similar modern plastic pipe, with sealed joints and a smooth interior. Trenchless bursting often uses HDPE. The material and diameter are chosen for the home and the connection at the street main.
No. The line has to be passable — the bursting head has to travel its full length. A line that has collapsed flat, or one with a sharp sideways offset, cannot be burst. The camera inspection decides, and a line that cannot be burst may need a trench for part or all of the run.
Yes. The bursting head opens a path larger than the old pipe, so the new pipe can be the same size or larger. That is one of the differences from lining, which always makes the inside diameter slightly smaller.
The work happens between two small pits, so the surface above the line is not opened. The pits are placed on either side of a driveway or walkway, and they are backfilled and graded when the work is done.
Most residential bursting jobs are measured in days. The camera inspection and the locate come first, then the pits are dug and the burst is pulled. A long or deep line takes longer than a short, shallow one.
Yes. Cast iron is brittle enough to break outward as the bursting head passes. The camera inspection first confirms the line is passable and no section has collapsed flat.
The old pipe is broken outward into the surrounding soil as the head passes, and it stays underground. The new pipe takes its place in the same path. Nothing has to be dug out or hauled away.
It depends on the belly. Bursting follows the path of the old pipe, so a mild belly may remain as a low spot in the new line. A deep belly is a problem with the fall of the line, and that section usually needs a trench to re-grade it.
Work that connects to the street main and work in the public right-of-way follows the city's rules, and permits are part of that process. The crew handling the job deals with the permit side before work starts.
No. The old pipe has to be roughly round and continuous. A collapsed section, a deep belly, or a sharp offset cannot be lined — the liner follows the shape of the old pipe, so it cannot correct those defects. The camera inspection decides.
Yes, slightly — the liner sits inside the old pipe, so the inside diameter is a little smaller. In practice the smooth interior of the liner often flows as well as the rough, scaled interior of the old pipe. The crew checks the diameter and the fall before recommending lining.
A cured liner is a new pipe inside the old one, with no joints for roots to enter. The finished line is checked on camera before the job is called done, and the liner is a long-term renewal of the line rather than a temporary patch.
It depends on the belly. A mild belly can sometimes be lined, but a deep belly is a low spot in the line, and the liner follows the shape of the old pipe — it does not correct the fall. A bad belly usually needs a trench to re-grade that section.
Most residential lining jobs are measured in days, including the inspection, the cleaning, the installation, and the curing time. The camera inspection and the locate give the crew the information needed to plan the schedule.
Water use in the house is paused while the liner is installed and cured, because the line has to stay dry for the resin to cure. The crew explains the timing before work starts, so the household can plan around it.
Yes, where the cast iron is still round and continuous. The liner gives the line a smooth interior that the corroded iron no longer has. A collapsed or badly offset cast iron section cannot be lined.
Work that connects to the street main and work in the public right-of-way follows the city's rules, and permits are part of that process. The crew handling the job deals with the permit side before work starts.
A camera inspection of the full line decides it. If the camera shows one failed section and the rest of the line is sound — tight joints, correct fall, no other damage — a spot repair fits. If the camera shows failures in many places, the line needs a larger fix.
It involves less digging and less pipe, so the work is smaller. But the comparison that matters is the whole cost over time: a spot repair on a line that fails again in a year means a second dig. The crew explains the camera findings so the choice is made with the full picture.
Most spot repairs are measured in a day or two of work on site, once the section is located. The camera inspection and the locate come first, then the pit is dug and the section is replaced.
It depends on the age and condition of the rest of the line. A newer line with one failed section usually holds. A 1950s clay lateral with one failed joint often has more joints at the same age, and the crew explains that risk before the repair is chosen.
Sometimes. A short liner can be installed over a single failed section, renewing it from the inside without digging. Whether that fits depends on the camera findings — a collapsed section cannot be lined, and needs a dig.
Work that connects to the street main and work in the public right-of-way follows the city's rules, and permits are part of that process. A spot repair in the yard, away from the street, is simpler — and the crew handling the job deals with the permit side before digging starts.
Yes, with planning. Frozen ground makes digging slower, but spot repairs do happen in Ohio winters. A line that is backing up now is handled as an urgent job regardless of the season.
The camera inspection before the repair is meant to prevent that surprise, by showing the full line first. If the dig reveals something the camera could not see, the crew explains what was found and what the options are before the work continues.
Cutting clears the line and restores flow, but it does not fix the joint the roots entered through. The roots will grow back, because the joint is still open and the tree is still there. The lasting fix is in the pipe — a spot repair, lining, bursting, or replacement.
Usually not. The tree is doing what trees do, and the pipe is the part that has failed. A new pipe with sealed joints has no openings for roots to find, whatever grows above it. And a street tree belongs to the city, not the homeowner.
They can kill the roots inside the pipe for a time, but they do not repair the joints, and they do not stop the roots from growing back. They are not a fix for a failed line, and they can make the work harder for the crew that follows.
A camera inspection shows it. The camera runs the full line to the street main, and the operator sees every joint and every root entry. Roots at one joint are a local problem; roots at many joints mean the whole line has opened with age.
Yes, where the line can be lined. A cured liner is a jointless pipe inside the old one, with no seams for roots to enter. The camera inspection decides whether the line is round and continuous enough to hold a liner.
The line needs a camera inspection, not another cleaning. A root problem that returns after every cleaning is a line problem — the joints have opened, and the fix is in the pipe. The camera shows how many joints are involved and which lasting fix fits.
No. A collapse is the pipe itself, not something inside the pipe. A cable machine cannot pass a collapsed section, and cleaning cannot restore a broken pipe. The collapsed section has to be dug out and replaced.
No. A bursting head cannot pass a collapsed section, and a liner needs a pipe to press against. The collapsed section has to be dug. The rest of the line may still be replaced trenchless, if the camera shows it is passable.
A camera inspection shows it. The camera stops at the collapse, and the locator marks the spot on the surface, with the depth. A line that will not clear, and that a cable cannot pass, is also a strong sign.
Ground movement from freeze and thaw, corrosion in cast iron, a point load over a shallow line, or a washout where soil has entered through an open joint. Parma's clay tile and cast iron laterals from the 1950s and 1960s are at the age where all of these happen.
It depends on the depth and the length of the failed section, and on whether the rest of the line needs work too. A single collapsed section is a spot repair, measured in days. A line collapsed in several places is a full replacement.
It can. A washout under the pipe leaves a void, and the surface above it — lawn, driveway, or walkway — can sink. The crew checks the surface over the line when the collapse is located, and the repair includes backfilling and grading the void.
Cleaning removes what is sitting in the belly, but the belly is still there, and it fills again. A belly is a problem with the fall of the line, not with a blockage, and the low section has to be re-graded.
It depends on the belly. A mild belly can sometimes be lined, but a deep belly is a low spot in the line, and the liner follows the shape of the old pipe — it does not correct the fall. A bad belly usually needs a trench to re-grade that section.
A camera inspection shows it. On the monitor, the camera enters a section where the water level rises — the camera is looking at standing water in the low spot. The locator marks the position and depth on the surface.
Ground settlement is the most common cause — soil washing out through an open joint, or compacting over time. Freeze-thaw movement in the clay soils, a poor original bed, and hillside ground in Seven Hills and Broadview Heights all add to it.
The low section is dug up and re-laid at the correct slope, on a prepared bed. A local belly is a spot repair; a line that has bellied in several places needs a full replacement, with the new line laid at a steady fall.
Yes, usually. The belly holds water and solids, which add weight and wash out more soil, and the section sags further. A belly that backs up occasionally will back up more often, and the next backup may be worse than the last.
Yes, if the crack is local. A single cracked section with good pipe on either side is a spot repair — one pit, one new section. Cracks in many places mean the line is failing as a whole, and the fix is lining, bursting, or a full replacement.
Yes, where the line is still round and continuous. A cured liner seals every crack at once with a jointless new pipe inside the old one. A cracked section that has collapsed cannot be lined, and needs a dig.
A camera inspection shows it. On the monitor, the operator sees the fracture in the pipe wall, and the roots and soil coming through it. The camera also shows whether the crack is local or spread along the line.
Point loads on brittle clay tile, corrosion thinning cast iron, and ground movement from freeze and thaw in the clay soils. Parma's clay and cast iron laterals from the 1950s and 1960s are at the age where all of these happen.
It can. A crack lets wastewater out into the soil around the pipe, which is why a wet or unusually green patch in the yard can be a sign of a cracked line. The camera and the wet patch together point to where the line is failing.
Yes, usually. The crack lets roots and soil in, and the soil washes out the bed under the pipe, letting the section settle further. A crack that backs up occasionally will back up more often, and the next failure may be a collapse.
The usual causes are a dry trap in a rarely used drain, a cracked pipe letting gas out, or a lateral that is backing up and pushing gas back. Running water into every drain is the first check — if the smell stops, the trap was dry.
Yes. A basement floor drain that is rarely used can dry out, and sewer gas comes up through it. Running water into the drain refills the trap, and the smell stops. A floor drain that dries out regularly may need attention, but water is the first step.
Not always. A dry trap is the most common cause, and it is a simple fix. A smell that persists after the traps are filled, and that is strongest at the lowest drain, points to the lateral — and a camera inspection shows whether the line is cracked, bellied, or backing up.
Sewer gas is unpleasant and, in high concentrations, it can be a health concern. A persistent sewer smell in the home should be checked, not ignored — especially if it comes with a backup or with headaches or nausea. Ventilate the area and call for help.
Yes, where the source is in the lateral. The camera shows cracks, open joints, and bellies — and whether the line is clear to the street main. A smell with no lateral problem points to the indoor drains or the vent system.
A smell that appears only in heavy rain points toward the street side — a surcharged main or a shared common-trench sewer pushing gas and water back. The camera shows whether the lateral is clear to the main, and the findings separate a lateral problem from a street-side one.
Sewer line trouble in your Parma home?
Call Now to reach a local sewer professional. Describe the problem, where it is, and what the line has been doing.
Call now for sewer line help
Tap Call Now to reach a local sewer professional. Tell them where the problem is, what the line has been doing, and whether wastewater is coming into the home.
Hours: Mon–Fri 7:00 AM–10:00 PM ET · Sat 8:00 AM–10:00 PM ET · Sun 7:00 AM–9:00 PM ET
Before you call
- Stop using water if the line is backing up.
- Keep people and pets away from any wastewater.
- Note which drains are slow, and which one backs up first.
- Note whether the problem happens in heavy rain, or all the time.
- Have the age of the home ready, if you know it.